Silo 4t-14,000 to BDS boring machines, plants of exploratory drilling, 2nt, 4t
Silo 4t - 14,000 to BDS boring machines, plants of exploratory drilling, 2nt, 4t
Silo 4t - 14,000 for pipes intended for lowering and lifting tools, as well as screwing and unscrewing of pipes.
Silo consists of the following basic parts: chassis, 7 2 spindle, removable 9 fitting, clips, 14 bolt 13.
Silo securely fastened onto the spindle using two rotary semirings 8, 9 and 10 bolts fitting.
In the bottom of the case using 2 axes 5 pinned ferrule, 14 Groove which installed bolt 13. Stroke
the bolt in the holder is limited to 12 stops.
To capture the grain must be aligned holes tube clips and shutter and cuff aperture type
coupling pipe until its upper flats with the slot on the bolt, then close the shutter.
The bolt in the closed and open positions is fixed the two spring tabs, in addition, by rotating it
is held in the closed position the centrifugal force.
During handling lifting operations 2 chassis is lowered towards the spindle 7 and its
cams falls on the spindle flange.
In this position, the enclosure can be freely turned relative to the spindle, which ensures the safety of the works,
as the tool rotation is excluded in the event of accidental inclusion of Rotator.
When building a tool for connecting fittings with drill pipe must be 7 spindle downwards
2 relative to the case so that the threaded end of the fitting has reached the clutch pipe and give the rotation of the spindle, in the process
What a fitting on a pipe navernetsja. While hull are above 2 cams cams 7 spindle and do not interfere with
spindle rotation relative to the case.
During drilling torque with spindle Rotary spindle is transmitted via the elevator, prizonnye 10 bolts and
Socket 9 on drill pipe.
For screwing and unscrewing the tool, you must install the spindle in the secondary position relative to
2 Corps so that JAWS spindle and Corps were engaged.
In this position the torque of the spindle Rotary through the slot in the spindle is transmitted via the elevator,
Hull 2, 5 axis, clip and bolt 13 14 on drill pipe.
To prevent the ingress of flushing fluid in shlicevoe compound under the spindle nose Rotator
is installed into the Groove fitting 9 rubber ring 15.
The body is made of Russian steel Foundry 35 l. Spindle bolt lifter - made of Russian steel 40Х choke switch made of Russian steel 40Х with subsequent termozakalkoj the threaded portion, in accordance with the drawing.
All products are high quality and fully meets all requirements of the normative documentation for that category of goods. Before delivery to the warehouse of finished products, all parts are hard technical control (OTC). Work with all transport companies, individual approach to each client, shares + discounts, possibility to manufacture non - standard products according to your drawings.